CK6263G CNC Hydraumatic Gap Bed Lathe Vertical 4 Tools/automatic screwing machine/ pipe threading lathe

Group cnc lathe
Min. Order 1 piece
Terms of Payment L/C, T/T
Update Time 2018-12-17
Item specifics
Condition:New
Power(W):11KW
MAX. SWING OVER BED:630MM
HOLE THROUGH SPINDLE:105 MM
Max. Swing Diameter:630MM
Type:Horizontal
MASX. SWING OVER CARRIAGE:350MM
Voltage:220V/380V
CNC CONTROLLER:GSK980T
MAX. PROCESSING LENGTH:1-4 M
Description

CK6263G CNC Hydraumatic Gap Bed Lathe Vertical 4 Tools/automatic screwing machine/ pipe threading lathe

Photos of Mahine

                                                                           Pipe Threading Lathe

                                                                 Pipe Threading Lathe Machine

The digitally-control pipe threading lathe,a special tool to turn and mill pipe threads,characterized by larger diameter of the spindle bore(over 130mm in general) and chucks installed before and behind the head stock so as to hold and process tubular or rod pieces of latge diameters. In addition to milling cylindrical/conical SI/BS pipe threads,it can be used to replace the general lathes to mill outer diameters,bore holes,and planes.It is widely used to process working pieces such as drilling pipes/collars and casing in the sectors such as petroleum,smelting,chemistry,hydropower and geologic exploration.

We use electric furnace smelting, resin sand molding casting technology,avoid sand holes, stoma casting internal defect effectively, all the accessories are assayed by imported spectrum analyzer, it assures the quality of the casting . The casting had been through second thermal aging treatment with good stability.
we can can absolutely ensure the casting quality after the United States imported equipment precision spectrometer analysis.
The bed of floor type is the whole structure. The rigidity and width of guide way on the bed of lathe is good enough. The guide way is through high-frequency quenching, the slide guide way joint SD compound soft belt. to make more wear-resisting and lower friction factor. The lead screw is the whole structure (not butt). The saddle is wider and thicker than before, the machine is running more stable. And the cutting ability is better.
With the super audio quenching treatment ,the hardness of Body guide rail can reach above HRC55 degrees, it can keep the hardness high accurate, and prolong the wear resistance and service life. 
The 3 boxes of lathe were processed by Taiwan’s CNC boring and milling machine center. The other tools are processed by CNC lathe and machine center to ensure the precision of the box and tools.
The lathe bed we produced is all research and development by our own engineers. These all can greatly increased the rigidity and are helpful to widen and Thicken the dragging plate,
The large plate guide guide rail (X) is also go through the super audio quenching treatment, so it increased hardness and then could guarantee the service life of equipment more efficiently.
The equipment will firstly tested by the laser interferometer imported from Britain to test repeated positioning accuracy of X, Z direction in order to make sure the accuracy. Then the whole machine will be tested according to the National standard whole machine. 
Our enterprise have got the ISO9001-2008 quality system certification and the European Union CE certification.

                                                      Lathe

Storage

                                                                 pipe threading lathe

Packaging

                                                                  lathe

Checkout Equipment

                                                                  Lathe

Company Profile

                                                                      Lathe Machine




Main Parameters

Model and specifications

CK6163G

CK6263G

CK6180G

CK6280G

Max. swing over bed

630mm

800mm

Max. swing in gap

800mm

1000mm

Available length in gap

300mm

300mm

Max. swing over carriage

350mm

550mm

Max. processing length

1500/3000mm

The actual machining length

1350/2850mm

Guide-way width

550mm

Range of spindle speed changes

17-1000 r/min

Number of spindle speed changes

Hydraulic 4 stepless shift gears

Hole through spindle

Φ105mm

Taper hole of spindle

Mefric 120(1:20)

Chuck connection form

K11 Φ325(Standard)

Power of main motor

11KW

X axis max. travel

500mm

Quick traverse speed

6m/min

Minimum input unit

0.001

Repeated positioning accuracy

±0.003

Tool post style

Vertical4(Standard)

Knife rest translocation time(S)

2.4s

Processing work-piece accuracy

IT7

Processing work-piece surface roughness

Ra1.6